2,4-MDA is an important chemical intermediate and pharmaceutical intermediate with excellent mechanical properties, low shrinkage, high temperature resistance, radiation resistance and abrasion resistance. The physical and chemical properties will be effectively performed to use with MDA-100. The structural formula is as follows:

Typical Properties

Appearance: While or light yellow solid granules or blocks

2,4’-MDA（Q/YPU 001）/% ≥95.0
Initial melting point（GB 2384）/℃ ≥85

Advantages and Benefits

Excellent mechanical properties

Low-shrinkage

High temperature resistance

Radiation-resistance

Abrasion-resistance

Applications

It can be broadly used to produce PI/PEI/epoxy resin hardner/Curing agent, expecially in electronic component industry.

Packages

Normally Paper and plastic composite bags, Jumbo bags, paper barrels, or customized.

Warehouse and Storage:  Warehouse should be dry, ventilated and protected from light. It is strictly forbidden to be heated to prevent oxidation. Leakage, sun and rain are strictly prohibited during transportation.

Shelf life:  Under the recommended storage conditions, the shelf life is 12 month. The shelf life beyond can still be used if it is tested to meet the technical specifications.

Safety precautions: Burnable, but nonflammable; Spray water or use dry powder, carbon dioxide, foam extinguishing agent after fire.MDA-100 can invade the body through the eyes and skin. Symptoms include severe liver poisoning, fever, upper abdominal pain, jaundice, anorexia, kidney damage and eye irritation.Wear clean and complete protective equipment (protective clothing, gloves, boots, helmet) to protect the skin; Wear protective goggles, masks and respirators in case of contact with eyes, rinse immediately with running water for at least 15 minutes. If skin is touched unexpectedly, remove the contaminated clothing and rinse the skin with plenty of running water.